Benefits - The Nailer

            I invented The Nailer in 1992 after searching for a better way to install drywall.  After 20 years of construction, I had seen my share of wasted wood and labor and had received plenty of busted knuckles installing wood backing.

            Drywall clips that pinched on to the drywall were awkward to use and could only be hard fastened to the framing- not the drywall.  All too often these clips caused serious injuries with their sharp edges and claws- there had to be a simpler way.

            The Nailer is that simple way…It is the only patented drywall backer that hard fastens to both the drywall and the framing and it comes in 100% recycled plastic and galvanized steel.  The best benefit is that it increases your bottom line.

Material Savings- You can save serious money on material alone.  By eliminating the extra wood backing on the top plates and in all of your vertical corners you are lowering your expensive lumber costs.  On hip roofs you can order your jack trusses without the bottom cords.  Do the math.  Each of the top builders in the nation could save millions of dollars per year in material costs alone.  Makes sense to me!

Labor Savings- One person is able to install The Nailer without help or much experience.  Installing The Nailer is incredibly fast and will take hours, if not days, off of the job.  By using The Nailer you are also saving on subcontractor costs since there is less wood to cut through for electrical and plumbing installation.

Energy Efficient- Using The Nailer increases your energy effectiveness and fiber glass insulation will install with ease.  No more stuffing small cavities with torn or cut fiberglass.  The Nailer allows full friction batts to be properly places without compromise and eliminates corner freezing and cracking.

Green Building- If you chose to use the original plastic Nailer made from 100% recycled HDPE #2 plastic you are selecting one of the greenest building products on the market.  While maintaining longevity and durability, you are helping to recycle plastic that would normally end up in land fills.  Whether your choice in The Nailer is plastic or metal, you are saving our natural resources and conserving our environment.  By using only 5 Nailers in place of 1 stud, you are able to save your wood for the places where it is truly needed.

Reduces Costly Callbacks Due to Truss Uplift- By placing The Nailer on the top plate to either side of the truss as it passes over a wall running perpendicular to the truss, and then fastening the drywall to The Nailer in the corner (not the truss), you are allowing the truss to arch and move if it needs to without ripping out the corner joint from the wall.  The drywall will also arch from season to season as needed without damage.  This method saves an unpredictable amount of costly labor.

Price and Service- We offer The Nailer at better prices than any competing drywall backer.  We back up our product with offers and service that is unmatched.  We believe fervently in our product and our ability to serve our customer’s needs.  Guaranteed.

Call me personally if you have any questions.  I look forward to hearing about your business and projects.

Sincerely,

Andy Pizer, Inventor and CEO Millennium Group
1-800-280-2304