Testimonials - page 2

I did not have any drywalling to install at the time; however, I did mock up drywall pieces using the NAILER. Before the year is out, I will be installing new drywalls in one of our rooms. Based on the "mock up," the NAILER will prove to be quite useful and time saving. Whoever thought of the NAILER is to be congratulated.

-Robert Cook
Indianapolis, IN

Use of the NAILER reduces the use of setting an additional stud for corners when initially building frame for walls. This was designed for drywall, but I used it for plywood. Also aids in time and cost of building.

-Harold L. Kisner
Aurora, W.Virginia

I used this product in a home remodeling job. I did find the NAILER easier to use than standard blocking. The only thing I haven't been able to get is a price to prove cost effectiveness, as I normally use blocks of scrap that would normally be disposed. The NAILER installed quick and easy with no need of special or additional tools other than standard hand tools. The sheet rock installation went normal without any problems. The only thing I would recommend is you should use a coarse threaded drywall screw. The coarse thread does not strip out. The taping job completed, no one can tell the difference. I was a little apprehensive about the strength of the NAILER at first, but after the test I would recommend the NAILER.

-Daniel Prouty
Bennington, VT

Steel Studs
I would recommend this product for the speed & time saved in using it. I took it to work and used it in metal stud construction. It not only saved time, but I believe it added strength to the corners because it is attached to the stud that is already securer to the framing because metal framing has a tendency to bow and bend until it is stiffened up. By attaching the drywall, this product made it easier to attach the adjoining sheet because it didn't flex or glue. Thumbs up on this product. As far as wood construction. I found this product an excellent tree saver eliminating a corner stud and a time saver eliminating the process of cutting filler blocks and installing them. A job well done & I hope this product catches on.

-Michael C. Krovisky
Beaver, PA

I have a project that I will be doing next year and will use these clips at corners to save on extra 2x4's and make insulating the out wall easier. I do like the idea.

-Randolph Allgeyer
Menominee, MI

I recommend the NAILER on big or small scale use. I finished off a bath in the basement. The cost of lumber and the time you save when installing The NAILER instead of studs is clear. They are easy to work with.

-Ronald D. Lassiter
Raleigh, NC

This product was sent to me at a perfect time. My brother and I were doing a room addition to our mother's house. We used the drywall hangers while putting up the clay wall in the room addition. They worked very well and saved time by not having to cut 2x4's for pieces at the corners. I would recommend this product to our members.

-John E. Anzak
Hannibal, OH

I needed to drywall a room on the back of a rental property we recently acquired. The previous owner had insulated the walls & ceiling by gluing 2" foam panels to the outside walls--no way I could put in wood backing without un-insulating in the corners. Due to the lack of time (a new tenant was moving in) The Nailer saved me time and money. Another plus is they are environmentally friendly--they are made from recycled, high-density plastics!

-Robert L Walker
Erie, PA

I found the NAILERS to be both quick and easy to use. They seemed to be sturdy & durable.

-Douglas Davenport
Saranaa, MI